Lexmark Printer J110 Uživatelský manuál stáhnout pdf (Strana 128)

3-34 Service Manual

4085-001

Diagnostics (Mode 2) - Supplies Tests

For each of the following four tests, the sequence of events is the

same:

1. The printheads are uncapped when the test is invoked.

2. The printheads moves to the middle of the frame to give the

servicer access to the printheads and tanks under test. The

data corresponding to the test being run begins updating real

time on the panel as described.

3. When the test is ended by pressing Return or Stop, the carrier

is homed and the printheads are capped.

Ink Tank Memories

This test determines the status of the electrical connection to the ink

tank memories. The status is indicated real time by either “+” (good)

or “-” (bad). The following screen is displayed:

To exit the test, select Return or Stop.

Printhead Memories

This test determines the status of the electrical connection to the

printhead memories. The status is indicated real time by either “+”

(good) or “-” (bad). The following screen is displayed:

To exit the test, select Return or Stop.

Ink Tank Mem Test

K=+ C=+ M=+ Y=+

Printhead Mem Test

K=+ CMY=+

1 2 ... 123 124 125 126 127 128 129 130 131 132 133 ... 247 248

Žádné komentáře

Lexmark Printer J110 Uživatelský manuál Strana 128