Lexmark 101 Uživatelský manuál stáhnout pdf (Strana 96)

Computer slows down when printing

These are possible solutions. Try one of the following:

IF YOU ARE USING A USB CONNECTION, THEN TRY A DIFFERENT USB CABLE

IF YOU ARE ON A NETWORK, THEN RESET THE POWER OF THE ACCESS POINT (ROUTER)

1 Unplug the power cord from the access point.

2 Wait ten seconds, and then insert the power cord.

Copy and scan troubleshooting

• “Copier or scanner does not respond” on page 96

• “Scanner unit does not close” on page 96

• “Poor copy or scanned image quality” on page 96

• “Partial copies or scans of documents or photos” on page 97

• “Scan was not successful” on page 97

• “Scanning takes too long or freezes the computer” on page 97

• “Cannot scan to a computer over a network” on page 97

Copier or scanner does not respond

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

SET YOUR PRINTER AS THE DEFAULT PRINTER

REMOVE AND REINSTALL THE PRINTER SOFTWARE

Scanner unit does not close

1 Lift the scanner unit.

2 Remove any obstruction keeping the scanner unit open.

3 Lower the scanner unit.

Poor copy or scanned image quality

If the "Before you troubleshoot" checklist does not solve the problem, then try one or more of the following:

CLEAN THE SCANNER GLASS

ADJUST THE SCAN QUALITY FROM THE PRINTER SOFTWARE

REVIEW THE TIPS FOR COPYING, SCANNING, AND IMPROVING PRINT QUALITY

Troubleshooting

1 2 ... 91 92 93 94 95 96 97 98 99 100 101 ... 139 140

Žádné komentáře

Lexmark 101 Uživatelský manuál Strana 96