Lexmark T652dn Uživatelská příručka stáhnout pdf (Strana 175)

To set up e‑mail alerts:

1 Type the printer IP address into the address field of your Web browser.

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP

address in the TCP/IP section.

2 Click Settings.

3 Under Other Settings, click E‑mail Alert Setup.

4 Select the items for notification, and type in the e‑mail addresses.

5 Click Submit.

Note: See your system support person to set up the e‑mail server.

Viewing reports

You can view some reports from the Embedded Web Server. These reports are useful for assessing the status of the

printer, the network, and supplies.

To view reports from a network printer:

1 Type the printer IP address into the address field of your Web browser.

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP

address in the TCP/IP section.

2 Click Reports, and then click the type of report you want to view.

Adjusting Power Saver

Available settings range from 1–240 minutes. The factory default is 30 minutes.

To increase or decrease the number of minutes before the printer enters Power Saver mode, do one of the following:

Using the Embedded Web Server

1 Type the printer IP address into the address field of your Web browser.

Note: If you do not know the IP address of the printer, then print a network setup page and locate the IP

address in the TCP/IP section.

2 Click Settings, and then click General Settings.

3 Click Timeouts.

4 In the Power Saver box, increase or decrease the number of minutes you want the printer to wait before it enters

Power Saver mode.

5 Click Submit.

Using the printer control panel

1 Make sure the printer is on and Ready appears.

2 Press .

Administrative support 175

1 2 ... 170 171 172 173 174 175 176 177 178 179 180 ... 218 219

Žádné komentáře

Lexmark T652dn Uživatelská příručka Strana 175